Vacuum Activated Switches: 3-13017 and 3-13018
Use of this optional accessory extends pump life, reduces noise, saves energy and reduces heat. Install in a vacuum outlet port on the Vac Steal. The adjustable actuation level and a separate deadband (hysteresis) control, permits automatic on/off of an electrical vacuum pump. The 3-13017 plugs into a USA style 115vac outlet and controls this same voltage to two similar outlets, turning the pump off and on as needed. The 3-13018 can be wired internally for use on other voltages (for example, 220 volts 50 hz) or for other uses of the contact closures.

Accessory Adapters: 1-13015 and 1-13016
Evacuate one Vac Steal with two or more vacuum sources in parallel. Accessory #1-13015 installs in a vacuum outlet port of the Vac Steal, creating a barbed connection for an additional source. It contains a one-way valve to prevent loss of vacuum when a source vacuum falls below Vac Steal level. Identical in function, the #1-13016 provides a 3/8" Polyflo connection instead of a barbed connection. Choose the one most convenient for your use.

Spare Fittings: 9-13020
Spare plastic ferrule for 3/8" Polyflo fittings.

Tie Down Kit: 9-13021
Secure the Vac Steal inside a machine, or anywhere that mechanical stability of the Vac Steal must be assured.

Vacuum Pumps: 9-02837 and 9-03320
For those people who have zero or inadequately reliable vacuum within their facility. These ¼ hp pumps are rated at approx. 4 cfm at atmospheric, and in conjunction with a Vac Steal as a buffer and distributor, they can service from 4 to 8 spinners quite adequately.
9-02837 for 115 vac 60 hz service
9-03320 for 220 vac 50 hz service

Vacuum Grease: 9-13019
A handy lab utility supply.

Polyflo Bulk Tubing: 9-13019
Polyflo bulk tubing, 3/8" o.d.

Tubing: 9-02840
Rubber vacuum tubing for barbed inserts.